A
-
Aerodynamic coefficients
Investigating the effect of the placement of the split drag rudder control system along the wing span of a flying wing aircraft on rolling and yawing moments. [Volume 11, Issue 2, 2022, Pages 25-37]
-
Aero turbine engine
Numerical simulation of radial inflow turbine impeller in aero turbine engine at design and off-design point [Volume 11, Issue 2, 2022, Pages 7-23]
B
-
Buck convertor
Organized Design for PDU Convertors of Nano-satellite via a Closed-Loop Algorithm [Volume 11, Issue 1, 2022, Pages 79-95]
C
-
Clamp Band Joints
Reliability assessment of structures of satellite and satellite carrier connected by clamp band [Volume 11, Issue 2, 2022, Pages 183-196]
-
Combustion chamber
Investigation of the effect of using a swirl nozzle and increasing injection pressure on the output characteristics and pollution of the combustion chamber [Volume 11, Issue 2, 2022, Pages 85-106]
-
Complex Dynamics
Investigating the Effect of Eccentricity and Mass Ratio of Primaries on the Structure of Lyapunov Orbits [Volume 11, Issue 2, 2022, Pages 153-163]
-
Composite
Experimental study and Optimization of Manufacturing Parameters of High Silica-Phenolic/Glass-Epoxy Laminate insulators in order to achieve the Highest thermal resistance and inter-laminar Strength [Volume 11, Issue 2, 2022, Pages 133-151]
-
Composite to composite bonding
Experimental study and Optimization of Manufacturing Parameters of High Silica-Phenolic/Glass-Epoxy Laminate insulators in order to achieve the Highest thermal resistance and inter-laminar Strength [Volume 11, Issue 2, 2022, Pages 133-151]
-
Conceptual design
Design of a Hybrid Heavy Multirotor with Long Range and High Payload Carrying Capacity for Using in Disaster Management [Volume 11, Issue 1, 2022, Pages 61-78]
D
-
Database search
Simulation of database search algorithms towards star-identification speed enhancement [Volume 11, Issue 1, 2022, Pages 115-130]
-
Design and off design point
Numerical simulation of radial inflow turbine impeller in aero turbine engine at design and off-design point [Volume 11, Issue 2, 2022, Pages 7-23]
-
Dimensionless Frequency
Numerical Study of the Effects of Excitation Frequency of Synthetic Jet Actuator on Aerodynamic Performance of a Supercritical Airfoil [Volume 11, Issue 1, 2022, Pages 161-176]
-
Disaster Management
Design of a Hybrid Heavy Multirotor with Long Range and High Payload Carrying Capacity for Using in Disaster Management [Volume 11, Issue 1, 2022, Pages 61-78]
E
-
Electrical discharge machining
Investigation of the effect of adding carbon nanotubes into the dielectric in the electrical discharge machining process of Ti-6Al-4V alloy [Volume 11, Issue 1, 2022, Pages 221-234]
-
ER3BP
Investigating the Effect of Eccentricity and Mass Ratio of Primaries on the Structure of Lyapunov Orbits [Volume 11, Issue 2, 2022, Pages 153-163]
F
-
Fault tolerant control
Defective tolerance control design for four-blade system in order to tolerate operational defects [Volume 11, Issue 1, 2022, Pages 25-40]
-
Feedback linearization
UAV trajectory tracking and formation flight guidance based on feedback linearization and sliding mode observer [Volume 11, Issue 2, 2022, Pages 107-120]
-
Fibonacci search technique
Simulation of database search algorithms towards star-identification speed enhancement [Volume 11, Issue 1, 2022, Pages 115-130]
-
Finite element
Nonlinear modeling of flexible manipulator with finite element discretization [Volume 11, Issue 2, 2022, Pages 121-132]
-
Flying Targets
An Analytical Solution to the Inverse Kinematic Problem, Dynamic Modeling, and Control of a 3 DOF Pedestal for Track Flying Targets [Volume 11, Issue 1, 2022, Pages 7-24]
-
Flying UAV
Investigating the effect of the placement of the split drag rudder control system along the wing span of a flying wing aircraft on rolling and yawing moments. [Volume 11, Issue 2, 2022, Pages 25-37]
-
Free vibration
Free vibration analysis of imperfection FG sandwich panel with piezoelectric face sheets using new hyperbolic theory [Volume 11, Issue 1, 2022, Pages 205-219]
G
-
Gel Propellant
3D Numerical simulation of gel simulant flow in a pressure swirl injector based on power-law model [Volume 11, Issue 2, 2022, Pages 69-83]
H
-
Hamilton’s Principal
Free vibration analysis of imperfection FG sandwich panel with piezoelectric face sheets using new hyperbolic theory [Volume 11, Issue 1, 2022, Pages 205-219]
-
High Altitude Test Facility
Experimental and numerical investigation of starting process of a parabolic nozzle in high altitude test simulator [Volume 11, Issue 2, 2022, Pages 39-52]
-
Hybrid Propulsion System
Design of a Hybrid Heavy Multirotor with Long Range and High Payload Carrying Capacity for Using in Disaster Management [Volume 11, Issue 1, 2022, Pages 61-78]
I
-
Imperfect FGM
Free vibration analysis of imperfection FG sandwich panel with piezoelectric face sheets using new hyperbolic theory [Volume 11, Issue 1, 2022, Pages 205-219]
-
Injection diameter
Investigation of the effect of injection diameter on the characteristics of the flowfield of transverse injection into supersonic air crossflow [Volume 11, Issue 1, 2022, Pages 131-146]
-
Injection pressure
Investigation of the effect of using a swirl nozzle and increasing injection pressure on the output characteristics and pollution of the combustion chamber [Volume 11, Issue 2, 2022, Pages 85-106]
-
Inlet performance
Numerical Analysis of Effect of Slot Geometry on Supersonic Air Inlet Performance [Volume 11, Issue 1, 2022, Pages 147-159]
-
Insulation
Experimental study and Optimization of Manufacturing Parameters of High Silica-Phenolic/Glass-Epoxy Laminate insulators in order to achieve the Highest thermal resistance and inter-laminar Strength [Volume 11, Issue 2, 2022, Pages 133-151]
-
Interaction
numerical simulation of wing /propeller interaction effects in aerodynamics coefficient of twin engine aircraft. [Volume 11, Issue 1, 2022, Pages 177-190]
-
Inverse kinematic problem
An Analytical Solution to the Inverse Kinematic Problem, Dynamic Modeling, and Control of a 3 DOF Pedestal for Track Flying Targets [Volume 11, Issue 1, 2022, Pages 7-24]
K
-
Keywords Designing algorithm
Organized Design for PDU Convertors of Nano-satellite via a Closed-Loop Algorithm [Volume 11, Issue 1, 2022, Pages 79-95]
-
Kriging
Metamodeling by kriging method for the disciplines of liquid hydrazine monopropellant propulsion system using Latin hypercube sampling method [Volume 11, Issue 2, 2022, Pages 53-68]
L
-
Lagrange method
Nonlinear modeling of flexible manipulator with finite element discretization [Volume 11, Issue 2, 2022, Pages 121-132]
-
Lagrangian points
Investigating the Effect of Eccentricity and Mass Ratio of Primaries on the Structure of Lyapunov Orbits [Volume 11, Issue 2, 2022, Pages 153-163]
-
Lambert’s problem
Target selection for asteroid mining mission based on Optimal trajectory design [Volume 11, Issue 1, 2022, Pages 97-114]
-
Latin Hypercube Sampling
Metamodeling by kriging method for the disciplines of liquid hydrazine monopropellant propulsion system using Latin hypercube sampling method [Volume 11, Issue 2, 2022, Pages 53-68]
M
-
Mach number
Numerical Analysis of Effect of Slot Geometry on Supersonic Air Inlet Performance [Volume 11, Issue 1, 2022, Pages 147-159]
-
Metamodeling
Metamodeling by kriging method for the disciplines of liquid hydrazine monopropellant propulsion system using Latin hypercube sampling method [Volume 11, Issue 2, 2022, Pages 53-68]
-
Mixing efficiency
Investigation of the effect of injection diameter on the characteristics of the flowfield of transverse injection into supersonic air crossflow [Volume 11, Issue 1, 2022, Pages 131-146]
-
Modeling
Nonlinear modeling of flexible manipulator with finite element discretization [Volume 11, Issue 2, 2022, Pages 121-132]
-
Multi-Agent Systems
Model-free adaptive optimal control of spacecraft formation flying reconfiguration using Q-Learning [Volume 11, Issue 1, 2022, Pages 41-60]
-
Multi-objective optimization
Target selection for asteroid mining mission based on Optimal trajectory design [Volume 11, Issue 1, 2022, Pages 97-114]
N
-
New hyperbolic theory
Free vibration analysis of imperfection FG sandwich panel with piezoelectric face sheets using new hyperbolic theory [Volume 11, Issue 1, 2022, Pages 205-219]
-
Novalac resin
Experimental study and Optimization of Manufacturing Parameters of High Silica-Phenolic/Glass-Epoxy Laminate insulators in order to achieve the Highest thermal resistance and inter-laminar Strength [Volume 11, Issue 2, 2022, Pages 133-151]
-
Numerical method
Increasing the electric power harvesting from the piezoelectric micro beam by the genetic algorithm method by optimizing the geometrical shape and material [Volume 11, Issue 2, 2022, Pages 165-181]
O
-
Optimization
Investigating the effect of the placement of the split drag rudder control system along the wing span of a flying wing aircraft on rolling and yawing moments. [Volume 11, Issue 2, 2022, Pages 25-37]
-
Optimization
Increasing the electric power harvesting from the piezoelectric micro beam by the genetic algorithm method by optimizing the geometrical shape and material [Volume 11, Issue 2, 2022, Pages 165-181]
P
-
Periodic Orbits
Investigating the Effect of Eccentricity and Mass Ratio of Primaries on the Structure of Lyapunov Orbits [Volume 11, Issue 2, 2022, Pages 153-163]
-
Piezoelectric
Free vibration analysis of imperfection FG sandwich panel with piezoelectric face sheets using new hyperbolic theory [Volume 11, Issue 1, 2022, Pages 205-219]
-
Piezoelectric
Increasing the electric power harvesting from the piezoelectric micro beam by the genetic algorithm method by optimizing the geometrical shape and material [Volume 11, Issue 2, 2022, Pages 165-181]
-
Power-law model
3D Numerical simulation of gel simulant flow in a pressure swirl injector based on power-law model [Volume 11, Issue 2, 2022, Pages 69-83]
-
Pre-impregnated
Experimental study and Optimization of Manufacturing Parameters of High Silica-Phenolic/Glass-Epoxy Laminate insulators in order to achieve the Highest thermal resistance and inter-laminar Strength [Volume 11, Issue 2, 2022, Pages 133-151]
-
Pressure recovery
Numerical Analysis of Effect of Slot Geometry on Supersonic Air Inlet Performance [Volume 11, Issue 1, 2022, Pages 147-159]
-
Pressure Swirl Injector
3D Numerical simulation of gel simulant flow in a pressure swirl injector based on power-law model [Volume 11, Issue 2, 2022, Pages 69-83]
-
Propulsion System
Investigation of the effect of using a swirl nozzle and increasing injection pressure on the output characteristics and pollution of the combustion chamber [Volume 11, Issue 2, 2022, Pages 85-106]
Q
-
Q-learning
Model-free adaptive optimal control of spacecraft formation flying reconfiguration using Q-Learning [Volume 11, Issue 1, 2022, Pages 41-60]
R
-
Radial inflow turbine
Numerical simulation of radial inflow turbine impeller in aero turbine engine at design and off-design point [Volume 11, Issue 2, 2022, Pages 7-23]
-
Redundancy
An Analytical Solution to the Inverse Kinematic Problem, Dynamic Modeling, and Control of a 3 DOF Pedestal for Track Flying Targets [Volume 11, Issue 1, 2022, Pages 7-24]
-
Reinforcement Learning
Model-free adaptive optimal control of spacecraft formation flying reconfiguration using Q-Learning [Volume 11, Issue 1, 2022, Pages 41-60]
-
Reliability
Reliability assessment of structures of satellite and satellite carrier connected by clamp band [Volume 11, Issue 2, 2022, Pages 183-196]
S
-
Second Throat Diffuser
Experimental and numerical investigation of starting process of a parabolic nozzle in high altitude test simulator [Volume 11, Issue 2, 2022, Pages 39-52]
-
Separation
Numerical Study of the Effects of Excitation Frequency of Synthetic Jet Actuator on Aerodynamic Performance of a Supercritical Airfoil [Volume 11, Issue 1, 2022, Pages 161-176]
-
Shear thinning
3D Numerical simulation of gel simulant flow in a pressure swirl injector based on power-law model [Volume 11, Issue 2, 2022, Pages 69-83]
-
Singularity
An Analytical Solution to the Inverse Kinematic Problem, Dynamic Modeling, and Control of a 3 DOF Pedestal for Track Flying Targets [Volume 11, Issue 1, 2022, Pages 7-24]
-
Sliding Mode Observer
UAV trajectory tracking and formation flight guidance based on feedback linearization and sliding mode observer [Volume 11, Issue 2, 2022, Pages 107-120]
-
Slot
Numerical Analysis of Effect of Slot Geometry on Supersonic Air Inlet Performance [Volume 11, Issue 1, 2022, Pages 147-159]
-
Space Liquid Monopropellant Propulsion System
Metamodeling by kriging method for the disciplines of liquid hydrazine monopropellant propulsion system using Latin hypercube sampling method [Volume 11, Issue 2, 2022, Pages 53-68]
-
Spiral nozzle
Investigation of the effect of using a swirl nozzle and increasing injection pressure on the output characteristics and pollution of the combustion chamber [Volume 11, Issue 2, 2022, Pages 85-106]
-
Star sensor
Simulation of database search algorithms towards star-identification speed enhancement [Volume 11, Issue 1, 2022, Pages 115-130]
-
Start process
Experimental and numerical investigation of starting process of a parabolic nozzle in high altitude test simulator [Volume 11, Issue 2, 2022, Pages 39-52]
-
Super Heavy Multirotor
Design of a Hybrid Heavy Multirotor with Long Range and High Payload Carrying Capacity for Using in Disaster Management [Volume 11, Issue 1, 2022, Pages 61-78]
-
Supersonic air inlet
Numerical Analysis of Effect of Slot Geometry on Supersonic Air Inlet Performance [Volume 11, Issue 1, 2022, Pages 147-159]
-
Synthetic Jet
Numerical Study of the Effects of Excitation Frequency of Synthetic Jet Actuator on Aerodynamic Performance of a Supercritical Airfoil [Volume 11, Issue 1, 2022, Pages 161-176]
T
-
Ternary search technique
Simulation of database search algorithms towards star-identification speed enhancement [Volume 11, Issue 1, 2022, Pages 115-130]
-
Three DOF trackers
An Analytical Solution to the Inverse Kinematic Problem, Dynamic Modeling, and Control of a 3 DOF Pedestal for Track Flying Targets [Volume 11, Issue 1, 2022, Pages 7-24]
-
Thrust Optimized Nozzle
Experimental and numerical investigation of starting process of a parabolic nozzle in high altitude test simulator [Volume 11, Issue 2, 2022, Pages 39-52]
-
Ti-6Al-4V
Investigation of the effect of adding carbon nanotubes into the dielectric in the electrical discharge machining process of Ti-6Al-4V alloy [Volume 11, Issue 1, 2022, Pages 221-234]
-
Trajectory Tracking
UAV trajectory tracking and formation flight guidance based on feedback linearization and sliding mode observer [Volume 11, Issue 2, 2022, Pages 107-120]
-
Transverse Injection
Investigation of the effect of injection diameter on the characteristics of the flowfield of transverse injection into supersonic air crossflow [Volume 11, Issue 1, 2022, Pages 131-146]
U
-
UAV
UAV trajectory tracking and formation flight guidance based on feedback linearization and sliding mode observer [Volume 11, Issue 2, 2022, Pages 107-120]
-
Uncertainty
Reliability assessment of structures of satellite and satellite carrier connected by clamp band [Volume 11, Issue 2, 2022, Pages 183-196]
W
-
Wagner aerodynamics
Nonlinear body-freedom flutter analysis in aircraft with the flexible wing [Volume 11, Issue 1, 2022, Pages 191-204]
Your query does not match with any item